2011 Honda Crossrunner that Honda has been releasing sketches of for the past month. A 782cc 90° V4 that’s derived from the VFR800 series, Crossrunner’s liquid-cooled, DOHC motor makes 102hp and 54 lbs•ft of torque. Honda hopes the Crossrunner will fill in a gap that is a cross between a naked street bike and an adventure bike, but has been very clear that it intends the Crossrunner to be a road-only machine (the Honda Crosstourer Concept should fill the off-road need just fine).
Sans a shaft-drive, the Honda Crossrunner will come with a chain final drive, uses an evolution of the VFR’s VTEC valve system for its 16 valves, and features Honda’s combined-ABS braking system. Road warriors get excited because the 2011 Honda Crossrunner comes with a 5.68 gallon tank.
Sans a shaft-drive, the Honda Crossrunner will come with a chain final drive, uses an evolution of the VFR’s VTEC valve system for its 16 valves, and features Honda’s combined-ABS braking system. Road warriors get excited because the 2011 Honda Crossrunner comes with a 5.68 gallon tank.
ENGINE
- Type Liquid-cooled 4-stroke 16-valve DOHC 90° V-4
- Displacement 782cm3
- Bore x Stroke 72 x 48mm
- Compression Ratio 11.6 : 1
- Max. Power Output 74.9kW/10,000min-1 (95/1/EC)
- Max. Torque 72.8Nm/9,500min-1 (95/1/EC)
- Idling Speed 1,200min-1
- Oil Capacity 3.8 litres
- Carburation PGM-FI electronic fuel injection
- Throttle Bore 36mm
- Aircleaner Oil-permeated, cartridge-type paper filter
- Fuel Tank Capacity 21.5 litres
- Ignition System Computer-controlled digital transistorised with electronic advance
- Ignition Timing 8° BTDC (idle) ~ 50° BTDC (1,200min-1)
- Sparkplug Type IMR9D-9H (NGK); VNH27Z (DENSO)
- Starter Electric
- Battery Capacity 12V/11AH (YTZ-12S)
- ACG Output 386W
- Headlights 12V; 55W x 1 (low) / 55W x 1 (high)
- Clutch Wet, multi-plate with coil springs
- Clutch Operation Hydraulic
- Transmission Type Constant mesh 6-speed
- Primary Reduction 1.934 (64/33)
- Gear Ratios 1 2.846 (37/13)
- 2 2.062 (33/16)
- 3 1.578 (30/19)
- 4 1.291 (31/24)
- 5 1.111 (30/27)
- 6 0.965 (28/29)
- Final Reduction 2.687 (43/16)
- Final Drive O-ring sealed chain
- FRAME
- Type Diamond; aluminium twin-spar; pivotless
- CHASSIS
- Dimensions (L x W x H) 2,130 x 799 x 1,243mm
- Wheelbase 1,464mm
- Caster Angle 25° 45′
- Trail 96mm
- Turning Radius 2.8m
- Seat Height 816mm
- Ground Clearance 140mm
- Kerb Weight 240.4kg (F: 115.2kg; R: 125.2kg)
- Type Front: 43mm cartridge-type telescopic fork with stepless preload adjustment, 165mm axle travel
- Rear: Pro-Link with gas-charged HMAS damper, 7-step preload and stepless rebound damping adjustment, 145mm axle travel
- Type Front: 6-spoke cast aluminium
- Rear: 5-spoke cast aluminium
- Rim Size Front: 17M/C x MT3.50
- Rear: 17M/C x MT5.50
- Tyre Size Front: 120/70 R17
- Rear: 180/55 R17
- Tyre Pressure Front: 225kPa
- Rear: 250kPa
- Type Front: 296mm dual floating hydraulic disc with 3-piston calipers, C-ABC and sintered metal pads
- Rear: 256mm hydraulic disc with 2-piston caliper, C-ABS and sintered metal pads
No comments:
Post a Comment